WYRESTORM EX-70-H2

Designed specifically to meet demand for the latest 4K UltraHD content, source and display devices in any residential or commercial setting, the EX-70-H2 is a Class A HDBaseT™ extender solution with full HDR support distributing 4K UHD HDR and 1080p video, audio, bidirectional IR/RS-232 and two-way PoH to remotely power either transmitter or receiver.

FLEXIBLE INSTALL OPTIONS WITH 2-WAY POH

No 2 installs are the same, that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX side.

CLASS A PERFORMANCE, CLASS B FORM FACTOR

70m transmission of 4K UHD content doesn’t always mean a large form factor device, at least, not where the EX-70-H2 is concerned. The Class A performance means that 60Hz UHD content can be sent to the maximum distance from just this small form factor.

SUPPORT FOR HDR

Transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The EX-70-H2 is no different, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 70m/230ft.

HDCP2.2 COMPLIANT

The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-70-H2 supports the multi-point distribution of this content over HDBaseT™.

FEATURES

• 4K UltraHD extender set capable of transmitting AV content over long distances using single cable Cat6 cable
• Robust HDBaseT™ Class A transmission of 4K HDR up to 70m/230ft and 1080p @60Hz 48bit up to 100m/328ft
• Full UHD 4K transmission supporting HDMI 2.0 video standards
• Supports all high definition resolutions including 4K UHD @30hz 4:4:4 24bit | 4K HDR @24Hz 4:2:0 10bit (BT.2020) - see specifications for details
• Revised chipset increases compatibility with new 4K UHD source devices
• Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
• Low profile chassis of 17mm for easier, more convenient installations behind screens at display zones.
• 2-way PoH (Power over HDBaseT™) enables either transmitter or receiver to be remotely powered by the other locally powered so mains power connectivity is not required at both source and display location
• Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
• HDCP 2.2 compliant
• 3D compatible
• Switchable RS-232 function mode on transmitter and receiver for firmware update
• Threaded bushings allow use of both standard and locking 18v DC power plugs
• Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal.
• Cable termination follows IEEE-568B standards
• Automatically adjusts feedback, equalization and amplification of signal for easy installation
• Energy efficient universal power supply included